Product Description
Product Advantage
ZheJiang Lulian Special Vehicle Co., Ltd. presents the Mining Front End Tipping Telescopic Hydraulic Oil Cylinder for Dump Trucks. This hydraulic cylinder is GS, RoHS, CE, and ISO9001 certified, making it ideal for medium pressure environments and normal temperatures.
Introducing the Haiwozhongke Hydraulic Cylinder
The Haiwozhongke hydraulic cylinder, designed by ZheJiang Lulian Special Vehicle Co., Ltd., is engineered with cutting-edge materials to withstand harsh conditions, ensuring the safety of both the driver and the vehicle.
Key Features:
- Durable construction for extreme durability
- Enhanced safety measures for driver protection
- Crafted with innovative materials for longevity
Benefits:
- Peace of mind for the driver in challenging environments
- Long-lasting performance for extended use
- Reliable safety features for worry-free operation
Upgrade your vehicle with the Haiwozhongke hydraulic cylinder for a safer and more reliable driving experience.
Introducing the Haiwozhongke Series Oil Cylinder
Enhance the efficiency and lift frequency of your dump trucks with the Haiwozhongke series oil cylinder from ZheJiang Lulian Special Vehicle Co., Ltd. This high-quality cylinder boosts unloading speed, making it ideal for increasing productivity on the job.
Product Description
Introducing the Haiwozhongke series oil cylinders from ZheJiang Lulian Special Vehicle Co., Ltd. These cylinders are designed for high-frequency operations, providing stability and low failure rates to enhance transfers and minimize downtime.
Key Features:
- Greater Adaptability to the Environment: Innovative sealing technology allows these cylinders to perform exceptionally in temperature ranges from -40 to 110ºC.
- Lighter and Greater Lifting Force: The Haiwozhongke series cylinders are 15-20% lighter than competitors, while delivering a 10-15% increase in lifting force, resulting in improved efficiency and profitability.
Product Advantage:
Hydraulic Cylinder by ZheJiang Lulian Special Vehicle Co., Ltd.
Safer: The Haiwozhongke hydraulic cylinder is crafted with advanced materials to endure tough conditions, ensuring safety for both drivers and vehicles.
Faster Unloading: The Haiwozhongke oil cylinder is structurally optimized to enhance unloading speed, improving efficiency.
Higher Lift Frequency: Ideal for high-frequency operations, the Haiwozhongke oil cylinder delivers consistent performance with minimal failure rates, reducing downtime.
Greater Adaptability to the Environment: Featuring innovative sealing technology, the Haiwozhongke cylinder can function effectively in temperatures ranging from -40 to 110ºC, ensuring reliable operation in various environments.
Product Description:
Lightweight Design:
Haiwozhongke cylinders from ZheJiang Lulian Special Vehicle Co., Ltd. are designed to be 15-20% lighter than competitors, resulting in a 10-15% increase in lifting force.
Enhanced Lifting Capacity:
These cylinders provide a significant 10-15% boost in lifting force compared to similar products, allowing for higher load capacity and improved profitability.
/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
How do telescopic cylinders handle variations in load capacity and weight?
Telescopic cylinders are designed to handle variations in load capacity and weight effectively. Here’s a detailed explanation:
Load-specific design:
Telescopic cylinders are engineered with load-specific design considerations to accommodate variations in load capacity and weight. Manufacturers take into account factors such as the maximum expected load, the range of anticipated loads, and the required safety factors. The cylinder’s components, materials, and dimensions are selected and configured accordingly to provide the necessary strength and stability.
Multiple stages:
The nested structure of telescopic cylinders, with multiple stages or sleeves that retract inside one another, allows for adaptability to different loads. Each stage can handle a specific portion of the load, and the collective capacity of all stages determines the overall load capacity of the cylinder. By adding or removing stages, telescopic cylinders can be customized to suit different load requirements, providing flexibility in handling variations in weight.
Hydraulic system control:
The hydraulic control system of telescopic cylinders plays a vital role in managing variations in load capacity. By regulating the flow of hydraulic fluid to each stage, operators can control the extension and retraction force applied to the cylinder. This control allows for adjustments based on the specific load and weight requirements, ensuring the cylinder operates within its safe working limits.
Pressure relief and overload protection:
Telescopic cylinders are often equipped with pressure relief valves and overload protection mechanisms to safeguard against excessive loads. Pressure relief valves help prevent over-pressurization of the hydraulic system by diverting excess fluid flow, protecting the cylinder from potential damage. Overload protection mechanisms, such as overload sensors or mechanical stops, are designed to activate and halt the cylinder’s movement if the load exceeds the safe operating limits.
Load distribution and stability:
Telescopic cylinders contribute to load distribution and stability. The nested design distributes the load across multiple stages, reducing stress on individual components and enhancing overall stability. Proper weight distribution on the machinery or equipment, as well as secure attachment of the load, further contribute to maintaining stability and ensuring safe operation.
It’s important to note that while telescopic cylinders can handle variations in load capacity and weight, it is crucial to operate within the specified load limits and follow the manufacturer’s guidelines. Exceeding the recommended load capacity can compromise the safety, performance, and longevity of the telescopic cylinder and the machinery it is installed on.
Consulting the manufacturer’s documentation, engineering specifications, and relevant industry standards is essential for understanding and adhering to the appropriate load capacity and weight guidelines when using telescopic cylinders.
How do telescopic cylinders contribute to precise reach and manipulation?
Telescopic cylinders play a crucial role in enabling precise reach and manipulation in various applications. Here’s a detailed explanation:
Extended reach:
Telescopic cylinders allow for extended reach in equipment such as cranes, excavators, booms, and material handling machinery. The nested design of telescopic cylinders, with multiple stages that retract inside one another, enables the equipment to achieve a longer reach when required. By extending the telescopic cylinder, operators can access objects or work areas that are located at a distance.
Precise positioning:
Telescopic cylinders provide precise positioning capabilities, allowing operators to manipulate objects with accuracy. The hydraulic control system regulates the extension and retraction of each stage of the cylinder, enabling smooth and controlled movement. This precise control is essential in applications that require accurate placement or manipulation of objects, such as in construction, manufacturing, or material handling.
Load handling:
Telescopic cylinders contribute to precise load handling by providing the necessary force and control. The cylinders are designed to handle heavy loads and can exert the required power to lift, lower, or manipulate objects with precision. The hydraulic control system allows operators to adjust the speed and movement of the telescopic cylinder, ensuring safe and controlled load handling.
Adaptability:
Telescopic cylinders offer adaptability in reaching and manipulating objects in various environments. Their nested design allows for compact retraction, making them suitable for applications with limited space. The ability to extend and retract the telescopic cylinder provides flexibility in adjusting the reach and adapting to different working conditions.
Support for attachments:
Telescopic cylinders often support attachments or tools that enhance reach and manipulation capabilities. For example, in excavators, telescopic cylinders are used to extend the boom or arm, while additional attachments such as buckets or grabs facilitate precise material handling or excavation tasks.
Overall, telescopic cylinders contribute to precise reach and manipulation by offering extended reach, precise positioning, load handling capabilities, adaptability, and support for attachments. Their hydraulic control system and nested design enable operators to achieve accurate and controlled movements, enhancing productivity and efficiency in various applications.
It’s important to consult the equipment manufacturer’s documentation and guidelines for specific information on the telescopic cylinder’s capabilities, operating parameters, and recommended maintenance practices to ensure optimal performance and safety.
What is a telescopic cylinder and how does it work?
A telescopic cylinder is a type of hydraulic cylinder that consists of multiple nested stages or sections that can extend and retract, similar to a telescope. Here’s a detailed explanation:
A telescopic cylinder is primarily used when a long stroke length is required while maintaining a compact retracted length. It is commonly used in applications such as dump trucks, cranes, aerial platforms, and other equipment that require extended reach or height adjustment. Here’s how a telescopic cylinder works:
- Structure: A telescopic cylinder consists of a series of cylindrical stages or sleeves that are progressively nested inside one another. These stages are typically made of high-strength steel or aluminum alloy. The number of stages can vary depending on the specific design and application.
- Extension and Retraction: When the telescopic cylinder is in the retracted position, the stages are nested inside one another, with the smallest stage located at the base. To extend the cylinder, hydraulic fluid is supplied to the base of the cylinder, creating pressure that pushes the smallest stage outwards. As the smallest stage extends, it exposes the next larger stage, which is then pushed out by the hydraulic pressure. This process continues until all the stages have extended, resulting in a longer overall stroke length.
- Locking Mechanism: Telescopic cylinders often incorporate a locking mechanism to secure the extended stages in position. This mechanism ensures stability and prevents unintentional retraction of the cylinder under load. The locking mechanism can be mechanical, hydraulic, or a combination of both, depending on the design and application requirements.
- Retraction: To retract the telescopic cylinder, hydraulic fluid is supplied to the opposite side of the cylinder, typically to the largest stage. The hydraulic pressure acts on the largest stage, retracting it first. As each stage retracts, it nests inside the next smaller stage until the cylinder is fully retracted to its original compact length.
- Control and Stability: The extension and retraction of a telescopic cylinder are controlled by a hydraulic system. By regulating the flow and pressure of the hydraulic fluid, operators can precisely control the extension and retraction speed of the cylinder. The nested design of the stages provides stability and load-bearing capacity, allowing the telescopic cylinder to handle substantial loads.
The use of telescopic cylinders offers several benefits:
- Extended Stroke Length: Telescopic cylinders provide a significantly longer stroke length compared to traditional single-stage cylinders, enabling extended reach or height adjustment without increasing the overall size of the cylinder.
- Compact Design: The nested structure of telescopic cylinders allows for a compact retracted length, making them suitable for applications with space constraints.
- Versatility: Telescopic cylinders can be customized to meet specific stroke length requirements. The number of stages can be adjusted, and the cylinders can be designed for different load capacities and working conditions.
- Efficient Operation: The controlled extension and retraction of telescopic cylinders enable precise load handling and positioning, improving operational efficiency.
Overall, a telescopic cylinder is a hydraulic cylinder with nested stages that can extend and retract, providing an extended stroke length while maintaining a compact retracted length. Its structure and operation make it ideal for applications requiring long reach or height adjustment.
It’s important to follow the manufacturer’s guidelines and specifications for the telescopic cylinder, including proper maintenance and inspection, to ensure its safe and reliable operation.
editor by Dream 2024-11-06
China Custom Engineering Boom 3 Stage Tie Rod Jack Telescopic Scissor Lift Hydraulic Cylinders Cylinder vacuum pump brakes
Product Description
Product Description
Large 300 ton small 5 ton long stroke single double acting telescopic hydraulic cylinder for sale
| Customer ID | Order Number | ||||||||
| Model | Application | ||||||||
| Data | Sample | Drawing | As per factory standard | Fluid Medium | Hydraulic Oil | Others | |||
| Cylinder Type | Piston | Plunger | Single Acting | Double Acting | Double Rod | Temperature | Below -20ºC | Normal | 80ºC to 120ºC |
| Oil Port | Location | Direction | Size | Force | Push | Pull | |||
| Usage Frequency | Working Continuously for Hours | Seal Requirement | |||||||
| Materials | As per factory standard | Special Requirements | |||||||
| Pressure Holding Requirements |
No Need | Yes, holding time for | |||||||
| Speed | mm/s | ||||||||
| Installation | Horizontal | Vertical | Angled or Arc | Air Bleed | No need | Head | End | ||
| Working Type | Working separately | Multiple cylinders working synchronously | Color | Customized | Per sample | Per factory standard | |||
| Cushion | No Need | Head end | Cap end | Head&cap | Non-adjustable | Adjustable | |||
| Accesories | Bearing | Fitting | Dust cover | Lock nut | Hose | Lock nut | Fixing bolt | Others | |
About US
Located in HangZhou City, ZheJiang province, center of North China Hydraulic industry, Lidingsheng (LDS) Lifting Machinery (ZheJiang ) Co., Ltd is specialized in hydraulic machinery, appliances and components, establishing an excellent reputation with superior quality and high-performance products since 2012. Covering an area of 16000 square meters, LDS provide Hydraulic Systems and parts including hydraulic power unit packs, mini hydraulic power unit pack, hydraulic cylinders, motors, gauges, filters, hydraulic valves and so on with modern standard workshop and advanced equipment.
With more than 80 series, 1,500 specifications products and 3 tech teams, LDS is capable of R&D and producing hydraulic system components, which are widely used in machinery industry, metallurgy industry, agricultural equipment, construction equipment, mining equipment, food industry, forestry equipment, trailers, excavators and other fields. Furthermore, LDS is capable of customizing hydraulic systems according to clients’ requirements on mounting styles, pressure ratings, sizes and configurations.
Please contact our sales manager and provide your custom requirements.
We will provide catalog with more products.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Certification: | RoHS, CE, ISO9001, SGS |
|---|---|
| Pressure: | 3-100MPa |
| Work Temperature: | -10ºC to 200ºC Above |
| Acting Way: | Optional |
| Working Method: | Optional |
| Adjusted Form: | Optional |
| Customization: |
Available
|
|
|---|
How do telescopic cylinders contribute to energy-efficient equipment operation?
Telescopic cylinders play a significant role in promoting energy-efficient equipment operation. Here’s a detailed explanation:
Reduced energy consumption:
Telescopic cylinders are designed to minimize energy consumption during equipment operation. The hydraulic system of telescopic cylinders allows for precise control over the extension and retraction of the cylinder stages. This control enables the equipment to use the minimum amount of hydraulic fluid and energy required to achieve the desired movement or position.
Efficient force transmission:
Telescopic cylinders are engineered to efficiently transmit forces from the hydraulic system to the desired application. The telescopic design allows for a direct and linear transfer of force, reducing energy losses that can occur in more complex mechanical systems. This efficient force transmission ensures that the energy supplied to the telescopic cylinder is effectively utilized to perform the desired work.
Compactness and weight reduction:
Telescopic cylinders offer compactness in equipment design, which contributes to energy efficiency. By retracting the cylinder stages, the overall length of the equipment can be minimized, reducing weight and inertia. This reduction in weight and inertia requires less energy to start and stop the movement of the equipment, resulting in energy savings during operation.
Optimized design:
Telescopic cylinders are designed with efficiency in mind. Manufacturers consider factors such as the cylinder’s bore size, rod diameter, and overall construction to ensure optimal performance while minimizing energy requirements. By using lightweight and high-strength materials, optimizing the cylinder’s dimensions, and reducing internal friction, telescopic cylinders can operate efficiently and contribute to energy savings.
Controlled motion:
Telescopic cylinders provide precise and controlled motion, allowing equipment operators to perform tasks with accuracy and efficiency. The hydraulic control system in telescopic cylinders enables smooth and proportional extension and retraction, reducing the need for excessive force or multiple adjustments. This controlled motion prevents energy waste and ensures that the equipment operates efficiently.
Applications in energy-efficient equipment:
Telescopic cylinders are utilized in various energy-efficient equipment, such as hybrid or electric-powered machinery. These equipment types rely on the optimization of energy usage to minimize environmental impact and reduce operating costs. Telescopic cylinders contribute to these objectives by providing efficient force transmission, controlled motion, and compact design.
Furthermore, the integration of advanced technologies, such as electronic control systems, sensors, and feedback mechanisms, can enhance the energy efficiency of equipment that incorporates telescopic cylinders. These technologies allow for further optimization of hydraulic system performance, energy recovery, and intelligent control of equipment operations.
Overall, telescopic cylinders contribute to energy-efficient equipment operation through reduced energy consumption, efficient force transmission, compactness and weight reduction, optimized design, and controlled motion. By utilizing telescopic cylinders in equipment design and considering energy-efficient practices, industries can achieve more sustainable and economical operation.
Consulting with equipment manufacturers or industry experts can provide further insights into the energy-saving benefits and applications of telescopic cylinders in specific equipment types.
Can telescopic cylinders be used in aerial work platforms for extended reach?
Yes, telescopic cylinders are commonly used in aerial work platforms to achieve extended reach. Here’s a detailed explanation:
Increased working height:
Telescopic cylinders enable aerial work platforms to reach greater heights compared to other types of lifting mechanisms. The multi-stage design of telescopic cylinders allows for sequential extension, providing incremental increases in working height. This extended reach capability is crucial for accessing elevated areas such as construction sites, maintenance tasks, or elevated platforms.
Flexible reach adjustment:
Telescopic cylinders offer flexibility in adjusting the reach of aerial work platforms. By extending or retracting the cylinders, operators can modify the platform’s horizontal reach according to the specific job requirements. This flexibility allows for precise positioning of the platform, ensuring safe and efficient access to work areas at varying distances from the base.
Stability and load capacity:
Telescopic cylinders contribute to the stability and load capacity of aerial work platforms during extended reach operations. The cylinders provide structural support and help distribute the weight of the platform and the load being lifted. This load distribution ensures stability, minimizes the risk of tipping or tilting, and allows for safe operation even at maximum reach.
Controlled movements:
Telescopic cylinders enable controlled and smooth movements of aerial work platforms. The hydraulic control system regulates the extension and retraction of the cylinders, allowing for precise control over the platform’s vertical and horizontal motions. This controlled movement enhances operator safety, minimizes vibrations, and enables accurate positioning of the platform during extended reach tasks.
Compact design:
Telescopic cylinders offer a compact design that allows for efficient integration into aerial work platforms. The cylinders can be retracted when not in use, minimizing the space occupied by the lifting mechanism. This compactness allows for better maneuverability, improved accessibility in confined spaces, and efficient transportation of the aerial work platform.
Integration with other platform features:
Telescopic cylinders can be integrated with other features of aerial work platforms to enhance functionality. For example, they can be combined with articulating booms or rotating platforms to achieve versatile reach and positioning capabilities. This integration expands the range of applications for aerial work platforms, enabling them to navigate obstacles, reach over obstacles, or access difficult-to-reach areas.
Advantages of telescopic cylinders in aerial work platforms:
Telescopic cylinders offer several advantages when used in aerial work platforms for extended reach:
- Increased working height for accessing elevated areas
- Flexible reach adjustment for precise positioning
- Stability and load capacity during extended reach
- Controlled movements for operator safety
- Compact design for maneuverability and transportation
- Integration with other platform features for enhanced functionality
Overall, telescopic cylinders are a reliable and efficient choice for achieving extended reach in aerial work platforms. Their ability to increase working height, provide flexibility in reach adjustment, ensure stability, enable controlled movements, offer a compact design, and integrate with other platform features makes them well-suited for a wide range of aerial work applications.
It’s important to consult the equipment manufacturer’s documentation and guidelines for specific information on the integration, operation, and maintenance of telescopic cylinders in aerial work platforms.
Can telescopic cylinders be used for both lifting and pushing applications?
Yes, telescopic cylinders can be used for both lifting and pushing applications. Here’s a detailed explanation:
Lifting applications:
Telescopic cylinders are commonly employed in lifting applications where they provide the necessary force and stroke length to lift heavy loads. The nested structure of telescopic cylinders allows for extended stroke lengths while maintaining a compact retracted length. The hydraulic system supplies pressurized fluid to each stage, generating the force required for lifting. As the stages extend, the load is raised to the desired height.
Pushing applications:
In addition to lifting, telescopic cylinders can also be used for pushing applications. In these cases, the telescopic cylinder applies force in the opposite direction, typically to move or push objects or components. The hydraulic system supplies pressurized fluid to each stage, causing the stages to extend and exert a pushing force. The nested structure of the cylinder ensures that the force is transmitted through each stage, allowing for effective pushing.
Benefits of telescopic cylinders for lifting and pushing:
Telescopic cylinders offer several benefits for both lifting and pushing applications:
- Extended stroke length: Telescopic cylinders provide a longer stroke length compared to other types of cylinders, allowing for increased reach and movement in lifting and pushing operations.
- Compact retracted length: Despite their extended stroke length, telescopic cylinders have a compact retracted length. This is advantageous when space is limited or when a shorter cylinder length is desired.
- High force capabilities: Telescopic cylinders are designed to handle heavy loads and can generate significant force, making them suitable for lifting and pushing applications that require substantial power.
- Adjustability and flexibility: The hydraulic control system of telescopic cylinders allows for adjustability in terms of force, speed, and stroke length, providing flexibility and adaptability to different lifting and pushing requirements.
- Versatility: Telescopic cylinders can be used in various industries and applications, including construction, material handling, automotive, and more, making them versatile solutions for lifting and pushing tasks.
It’s important to consider the specific requirements of the lifting or pushing application and consult the manufacturer’s guidelines to ensure the proper selection, installation, and operation of telescopic cylinders in order to achieve safe and efficient performance.
editor by CX 2024-02-04
China Professional 75 Ton Jack Set Spring Return Ultra Low Telescopic Hydraulic RAM Cylinder vacuum pump ac system
Product Description
Product Description
KS-RSM Series, Low Height Hydraulic Cylinder (Flat Jack)
1. Max working pressure 700 bar.
2. Single acting cylinders with heavy duty return springs and are designed to be used in all orientat
3. These flat cylinders will fit where other cylinders collapsed height will not enable placement.
4. Coated with corrosive resistant baked enamel.
5.Steel cylinder piston rods are hard chrome plated.
6. Saddles are not required due to grooved cylinder piston rod ends.
7. The stop ring avoids the piston rod over-reaching and enables maximum cylinder extension.
Very low price and very good quality , compare POWER TEAM and CHINAMFG models, this type airhydraulic pump was same quality and function
RSM-750 Low Height Hydraulic Cylinder
Max Operating Pressure: 700Bar / 10,000Psi
Capacity: 75tons
Stroke: 16mm / 0.63in
Collapsed Height: 79mm / 3.13in
Return Type: Single-Acting, Spring Return
Material: Alloy Steel
Oil Capacity: 164cm³
Weight: 11.3kg / 25Ibs
Product Parameters
Quick Selection Chart :
For complete techniacl information please contact the sales.
| Model | Capacity |
Stroke |
Oil Capacity | Collap. Height | Outside Dia. D | Plunger Dia. | Saddle Protr. From Plgr. |
Bolt Circle | Weight |
| (ton) | B (mm) | (cm³) | A (mm) | (mm) | F(mm) | K (mm) | Z(mm) | (kg) | |
| KSRSM-50 | 5 | 6 | 4 | 32 | 58X41 | 25.4 | 1 | – | 1.0 |
| KSRSM-100 | 10 | 12 | 18 | 42 | 82X55 | 38.1 | 1 | – | 1.4 |
| KSRSM-200 | 20 | 11 | 32 | 51 | 101X76 | 50.8 | 1 | – | 3.1 |
| KSRSM-300 | 30 | 13 | 55 | 58 | 117X95 | 63.4 | 2 | – | 4.5 |
| KSRSM-500 | 45 | 16 | 99 | 66 | 140X114 | 69.8 | 2 | – | 6.8 |
| KSRSM-750 | 75 | 16 | 164 | 79 | 165X139 | 82.6 | 2 | – | 11.3 |
| KSRSM-1000 | 100 | 16 | 203 | 85 | 178X153 | 92.2 | 2 | – | 14.5 |
| KSRSM-1500 | 150 | 16 | 317 | 100 | 215X190 | 114.3 | 2 | – | 26.3 |
| KSRCS-101* | 10 | 38 | 55 | 88 | 69 | – | 5 | 26 | 4.1 |
| KSRCS-201* | 20 | 45 | 129 | 98 | 92 | – | 3 | 40 | 5.0 |
| KSRCS-302* | 30 | 62 | 261 | 117 | 101 | – | 3 | 40 | 6.8 |
| KSRCS-502* | 50 | 60 | 373 | 122 | 124 | – | 2 | 40 | 10.9 |
| KSRCS-1002* | 100 | 57 | 722 | 141 | 165 | – | 1 | 55 | 22.7 |
Please tell me your needs, i will give you a suitable sloution~
Cases Show
We can make different types cylinders according to various construction requirements….
Please contact Davina Chen: -199-5169-4295 for detals.
Related Products
Hydraulic Manual Pump Set
Including:
1* Single-acting Manual Pump, P-142
1* Hydraulic Cylinder, RSM-750, 75tons, 16mm stroke
1* Pressure Guage with coupler, KN-63-70
1* Guage Adapter, GA-3
1* 1.8meter High Pressure Hose with couplers
Please contact sale to get quotation.
Company Profile
Payment & Shipping
If you don’t have a forwarder in China, please contact sales. We will quote you the cheapest / fastest shipping cost.
We supply:
All express , by sea , by air , by sea to door , by air to door ….etc..
Contacter:
Davina Chen: -199-5169-4295
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Certification: | CE, ISO9001 |
|---|---|
| Pressure: | High Pressure |
| Work Temperature: | Normal Temperature |
| Acting Way: | Single Acting |
| Working Method: | Hydraulic |
| Adjusted Form: | Regulated Type |
| Samples: |
US$ 418/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
How do telescopic cylinders contribute to energy-efficient equipment operation?
Telescopic cylinders play a significant role in promoting energy-efficient equipment operation. Here’s a detailed explanation:
Reduced energy consumption:
Telescopic cylinders are designed to minimize energy consumption during equipment operation. The hydraulic system of telescopic cylinders allows for precise control over the extension and retraction of the cylinder stages. This control enables the equipment to use the minimum amount of hydraulic fluid and energy required to achieve the desired movement or position.
Efficient force transmission:
Telescopic cylinders are engineered to efficiently transmit forces from the hydraulic system to the desired application. The telescopic design allows for a direct and linear transfer of force, reducing energy losses that can occur in more complex mechanical systems. This efficient force transmission ensures that the energy supplied to the telescopic cylinder is effectively utilized to perform the desired work.
Compactness and weight reduction:
Telescopic cylinders offer compactness in equipment design, which contributes to energy efficiency. By retracting the cylinder stages, the overall length of the equipment can be minimized, reducing weight and inertia. This reduction in weight and inertia requires less energy to start and stop the movement of the equipment, resulting in energy savings during operation.
Optimized design:
Telescopic cylinders are designed with efficiency in mind. Manufacturers consider factors such as the cylinder’s bore size, rod diameter, and overall construction to ensure optimal performance while minimizing energy requirements. By using lightweight and high-strength materials, optimizing the cylinder’s dimensions, and reducing internal friction, telescopic cylinders can operate efficiently and contribute to energy savings.
Controlled motion:
Telescopic cylinders provide precise and controlled motion, allowing equipment operators to perform tasks with accuracy and efficiency. The hydraulic control system in telescopic cylinders enables smooth and proportional extension and retraction, reducing the need for excessive force or multiple adjustments. This controlled motion prevents energy waste and ensures that the equipment operates efficiently.
Applications in energy-efficient equipment:
Telescopic cylinders are utilized in various energy-efficient equipment, such as hybrid or electric-powered machinery. These equipment types rely on the optimization of energy usage to minimize environmental impact and reduce operating costs. Telescopic cylinders contribute to these objectives by providing efficient force transmission, controlled motion, and compact design.
Furthermore, the integration of advanced technologies, such as electronic control systems, sensors, and feedback mechanisms, can enhance the energy efficiency of equipment that incorporates telescopic cylinders. These technologies allow for further optimization of hydraulic system performance, energy recovery, and intelligent control of equipment operations.
Overall, telescopic cylinders contribute to energy-efficient equipment operation through reduced energy consumption, efficient force transmission, compactness and weight reduction, optimized design, and controlled motion. By utilizing telescopic cylinders in equipment design and considering energy-efficient practices, industries can achieve more sustainable and economical operation.
Consulting with equipment manufacturers or industry experts can provide further insights into the energy-saving benefits and applications of telescopic cylinders in specific equipment types.
Can telescopic cylinders be used in agricultural machinery for various tasks?
Yes, telescopic cylinders are widely used in agricultural machinery for various tasks. Here’s a detailed explanation:
Versatile applications:
Telescopic cylinders offer versatility and are suitable for a wide range of tasks in agricultural machinery. They are commonly employed in equipment such as tractors, harvesters, sprayers, loaders, and tillers.
Lifting and lowering:
Telescopic cylinders are utilized for lifting and lowering applications in agricultural machinery. They provide the necessary force to raise and lower attachments such as loader buckets, tillage implements, or harvest platforms. The telescopic cylinder’s design allows for efficient force transmission, enabling smooth and controlled movement.
Reach extension:
Telescopic cylinders are valuable for extending the reach of agricultural machinery. For example, in a harvester, telescopic cylinders can extend the reach of the harvesting arm, allowing operators to access crops in a broader area. This extension capability increases efficiency and productivity by reducing the need for repositioning the machinery frequently.
Adjustable working height:
Telescopic cylinders are employed in agricultural machinery to provide adjustable working heights. For instance, in sprayers or spreaders, telescopic cylinders can adjust the height of the booms or spreading mechanisms, allowing for precise application of fertilizers, pesticides, or seeds.
Folding and unfolding:
Telescopic cylinders are used to facilitate folding and unfolding actions in agricultural machinery. This is particularly useful for equipment that needs to be transported or stored in compact configurations. For example, telescopic cylinders can fold the wings of a tillage implement for easy transport on roads or through narrow gateways.
Stabilization and leveling:
Telescopic cylinders contribute to the stabilization and leveling of agricultural machinery. They are employed in tasks such as adjusting the height and angle of plows, cultivators, or balers to ensure proper ground engagement and uniform performance.
Advantages of telescopic cylinders in agricultural machinery:
Telescopic cylinders offer several advantages in agricultural machinery:
- Versatility: Telescopic cylinders can be used for various tasks, providing flexibility and adaptability in agricultural operations.
- Efficient force transmission: The telescopic design allows for direct and efficient force transmission, maximizing the equipment’s lifting and operational capabilities.
- Precise control: Telescopic cylinders enable precise control over movements, allowing for accurate positioning and improved productivity.
- Space optimization: Telescopic cylinders contribute to space optimization by enabling folding or compact configurations, facilitating transportation and storage of agricultural machinery.
Overall, telescopic cylinders are valuable components in agricultural machinery, offering versatility, efficient force transmission, precise control, and space optimization. They enhance the functionality and productivity of agricultural equipment across various tasks and applications.
It’s important to consult the equipment manufacturer’s documentation and guidelines for specific information on the integration, operation, and maintenance of telescopic cylinders in agricultural machinery.
How does a telescopic cylinder handle variations in extension and retraction?
A telescopic cylinder is designed to handle variations in extension and retraction through its inherent structure and hydraulic system. Here’s a detailed explanation:
Handling variations in extension:
When extending a telescopic cylinder, each stage or sleeve extends successively, one inside the other, to achieve the desired stroke length. This nested structure allows for incremental extension, providing flexibility in adapting to different extension requirements. The hydraulic system supplies pressurized fluid to each stage’s piston, generating the necessary force for extension. The internal flow paths in the cylinder ensure synchronized movement of the stages, allowing for controlled and precise extension.
Handling variations in retraction:
During retraction, the telescopic cylinder stages retract in the reverse order of extension. The hydraulic system controls the flow of fluid to each stage, allowing for controlled retraction. The nested structure of the cylinder ensures that each stage retracts smoothly inside the preceding stage. The hydraulic pressure and flow are regulated to prevent rapid or uncontrolled retraction, ensuring safe and stable operation.
Compensating for variations:
Telescopic cylinders are designed to compensate for variations in extension and retraction through their hydraulic control systems. The hydraulic system can be adjusted to vary the flow rate, pressure, or force applied to each stage, allowing for fine-tuning and accommodating different extension and retraction requirements. Additionally, the locking mechanisms incorporated in telescopic cylinders help maintain the extended position securely, compensating for external forces or variations in loads.
Overall, the nested structure, hydraulic system, and locking mechanisms of telescopic cylinders provide the necessary flexibility and control to handle variations in extension and retraction. This enables the cylinders to adapt to different operating conditions, loads, and stroke length requirements in various applications.
It’s important to follow the manufacturer’s guidelines and recommendations for proper operation, maintenance, and adjustment of telescopic cylinders to ensure their reliable and safe performance.
editor by CX 2024-01-23
China high quality 10-200t Hydraulic Cylinder Single Acting Piston Telescopic Cylinder Jack vacuum pump
Product Description
Hydraulic Cylinders 10-200T Capacity Piston Cylinder
Product Description
Hydraulic Cylinder is widely used in electric power, chemical industry, steel, bridge, machinery and other enterprises.
- Light and compact, easy to use and carry
- Baked enamel finish for increased corrosion resistance
- Imported seals allows the oil cylinder work continuously without abrasion
- All raw materials are processed at the top level
- Produced by CNC lathe and grinding machine using High-strength alloy steel, process through high level heat treatment
Product Parameters
Detailed Photos
QUALITY CONTROL PROCESS
FAQ
Q1: Are you a factory or a trading company?
A1:We are a combination of both, we focused on manufacturing material handling product such as lift tables, manual & electric pallet trucks and lifting platforms over 35 years, we also exporting manual & electric chain hoist, lever hoisting, lifting clamp and steel jack. We are your ideal choice for 1 stop purchase with our compete line of industrial lifting/moving equipment
Q2: Can Giant lift provide customized products? OEM products or ODM products?
A2: Yes, Giant lift can provide customized products according to your requirement. Both OEM and ODM are acceptable.
Q3: Can we print the LOGO on products?
A3: Yes, the OEM is available with the permission of our customers.
Q4: How do you control your quality?
A4: 1. We only select high-quality steel material from famous steel group
2. Standardized production process with traceable ID Card, every part can be tracked to the original records.
3. 100% finished product testing before shipping.
4. We accept third party product inspections.
5. ISO9001 Quality management system certificated factory
6. Supervised container loading process, ensures the last step security
Q5: How long is the warranty on your products?
A5: We provide 12 months warranty for all of our product, excluding wear parts such as wheels, tire or hydraulic oil
Q6: What’s the lead time for production?
A6: Usually around 10-15 days after payment received, around 30 days during new year’s or national holidays.
Q7: What Payment terms do you accept?
A7: T/T or L/C, if you want any other method please contact sales
Q8: What are your advantages compared to the others?
A8:
- Unique products, with customized service.
- Timely production and delivery, time is money.
- Market protection service, long term business strategy.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Technical Support and Spare Parts Supply |
|---|---|
| Warranty: | One Year |
| Type: | Hydraulic Jack |
| Structure: | Hydraulic Jack |
| Capacity (Load): | 10t-200t |
| Power Source: | Hydraulic |
| Samples: |
US$ 80/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
How do telescopic cylinders contribute to energy-efficient equipment operation?
Telescopic cylinders play a significant role in promoting energy-efficient equipment operation. Here’s a detailed explanation:
Reduced energy consumption:
Telescopic cylinders are designed to minimize energy consumption during equipment operation. The hydraulic system of telescopic cylinders allows for precise control over the extension and retraction of the cylinder stages. This control enables the equipment to use the minimum amount of hydraulic fluid and energy required to achieve the desired movement or position.
Efficient force transmission:
Telescopic cylinders are engineered to efficiently transmit forces from the hydraulic system to the desired application. The telescopic design allows for a direct and linear transfer of force, reducing energy losses that can occur in more complex mechanical systems. This efficient force transmission ensures that the energy supplied to the telescopic cylinder is effectively utilized to perform the desired work.
Compactness and weight reduction:
Telescopic cylinders offer compactness in equipment design, which contributes to energy efficiency. By retracting the cylinder stages, the overall length of the equipment can be minimized, reducing weight and inertia. This reduction in weight and inertia requires less energy to start and stop the movement of the equipment, resulting in energy savings during operation.
Optimized design:
Telescopic cylinders are designed with efficiency in mind. Manufacturers consider factors such as the cylinder’s bore size, rod diameter, and overall construction to ensure optimal performance while minimizing energy requirements. By using lightweight and high-strength materials, optimizing the cylinder’s dimensions, and reducing internal friction, telescopic cylinders can operate efficiently and contribute to energy savings.
Controlled motion:
Telescopic cylinders provide precise and controlled motion, allowing equipment operators to perform tasks with accuracy and efficiency. The hydraulic control system in telescopic cylinders enables smooth and proportional extension and retraction, reducing the need for excessive force or multiple adjustments. This controlled motion prevents energy waste and ensures that the equipment operates efficiently.
Applications in energy-efficient equipment:
Telescopic cylinders are utilized in various energy-efficient equipment, such as hybrid or electric-powered machinery. These equipment types rely on the optimization of energy usage to minimize environmental impact and reduce operating costs. Telescopic cylinders contribute to these objectives by providing efficient force transmission, controlled motion, and compact design.
Furthermore, the integration of advanced technologies, such as electronic control systems, sensors, and feedback mechanisms, can enhance the energy efficiency of equipment that incorporates telescopic cylinders. These technologies allow for further optimization of hydraulic system performance, energy recovery, and intelligent control of equipment operations.
Overall, telescopic cylinders contribute to energy-efficient equipment operation through reduced energy consumption, efficient force transmission, compactness and weight reduction, optimized design, and controlled motion. By utilizing telescopic cylinders in equipment design and considering energy-efficient practices, industries can achieve more sustainable and economical operation.
Consulting with equipment manufacturers or industry experts can provide further insights into the energy-saving benefits and applications of telescopic cylinders in specific equipment types.
Can telescopic cylinders be used in manufacturing machinery for material processing?
Yes, telescopic cylinders are commonly used in manufacturing machinery for material processing tasks. Here’s a detailed explanation:
Material handling and manipulation:
Telescopic cylinders are utilized in manufacturing machinery to handle and manipulate materials during the processing stages. They enable lifting, lowering, pushing, or pulling of components, parts, or raw materials, facilitating various manufacturing operations such as cutting, bending, shaping, or assembly.
Positioning and alignment:
Telescopic cylinders contribute to precise positioning and alignment of materials in manufacturing machinery. The controlled extension and retraction of the cylinders allow operators to align workpieces accurately, ensuring consistent quality, dimensional accuracy, and proper fit during material processing.
Adjustable working height:
In manufacturing machinery, telescopic cylinders provide the advantage of adjustable working height. By extending or retracting the cylinders, the height of the work surface or processing area can be modified to accommodate different material sizes or operator preferences. This flexibility enhances ergonomics and facilitates efficient material processing.
Modular design for customization:
Telescopic cylinders feature a modular design that allows for customization according to specific manufacturing requirements. The number of stages or sections can be adjusted to achieve the desired extended length and capacity of the cylinder. This modularity enables telescopic cylinders to be tailored to the dimensions and processing needs of different manufacturing machinery.
Force generation and control:
Telescopic cylinders generate the necessary force to perform material processing tasks. The hydraulic control system regulates the extension and retraction of the cylinders, allowing operators to control the force applied during cutting, bending, or other processing operations. This force control ensures precise and consistent material processing while minimizing the risk of damage or deformation.
Space optimization:
Telescopic cylinders contribute to space optimization in manufacturing machinery. Their compact design allows for efficient utilization of available space, especially in equipment with limited footprint. The telescopic nature of the cylinders enables them to retract when not in use, minimizing the space occupied and allowing for better overall layout and arrangement of the machinery.
Advantages of telescopic cylinders in manufacturing machinery:
Telescopic cylinders offer several advantages in material processing applications within manufacturing machinery:
- Material handling and manipulation capabilities
- Precise positioning and alignment of materials
- Adjustable working height for versatility
- Modular design for customization
- Force generation and control for consistent processing
- Space optimization in compact machinery
Overall, telescopic cylinders are widely used in manufacturing machinery for material processing tasks, providing material handling, positioning, and force control capabilities. Their flexibility, modularity, and precise control contribute to efficient and accurate material processing operations in manufacturing.
It’s important to consult the equipment manufacturer’s documentation and guidelines for specific information on the integration, operation, and maintenance of telescopic cylinders in manufacturing machinery.
What are the benefits of using telescopic cylinders for long-reach tasks?
Telescopic cylinders offer several benefits when it comes to long-reach tasks. Here’s a detailed explanation:
Extended reach:
One of the primary advantages of telescopic cylinders is their ability to provide extended reach. By utilizing a nested structure with multiple stages, telescopic cylinders can achieve significantly longer stroke lengths compared to other types of cylinders. This extended reach is beneficial for tasks that require accessing or manipulating objects or materials at a distance.
Compact retracted length:
Despite their extended reach, telescopic cylinders have a relatively compact retracted length. This is advantageous in situations where space is limited or when a shorter cylinder length is preferred. The compact retracted length enables telescopic cylinders to be installed in confined areas or integrated into equipment without excessive protrusion.
Flexible and adjustable:
Telescopic cylinders offer flexibility and adjustability, allowing for fine-tuning of the stroke length, force, and speed. This adjustability is particularly useful in long-reach tasks where precise control and positioning are required. The hydraulic control system of telescopic cylinders enables operators to optimize the cylinder’s performance according to the specific task and operating conditions.
High force capabilities:
Telescopic cylinders are designed to handle heavy loads and can generate substantial force. This makes them suitable for long-reach tasks that involve lifting, pushing, pulling, or manipulating objects at a distance. The high force capabilities of telescopic cylinders ensure that the required power is available to perform the task effectively.
Enhanced stability:
Telescopic cylinders are engineered to provide stability during long-reach tasks. The nested structure and hydraulic control system work together to ensure synchronized and controlled extension and retraction of the stages. This stability is crucial for maintaining precise positioning, minimizing oscillations or vibrations, and preventing potential hazards or accidents.
Versatility:
Telescopic cylinders find applications in various industries and tasks that involve long-reach requirements. They are commonly used in construction equipment, material handling machinery, cranes, booms, and many other applications where extended reach is necessary.
Overall, the benefits of using telescopic cylinders for long-reach tasks include extended reach, compact retracted length, flexibility, high force capabilities, enhanced stability, and versatility. These advantages make telescopic cylinders a valuable choice for tasks that require reaching or manipulating objects at a distance.
It’s important to consult the manufacturer’s guidelines and specifications to ensure the proper selection, installation, and operation of telescopic cylinders based on the specific long-reach task requirements.
editor by CX 2023-12-29